Full Height Turnstile RFID Card Reader Fingerprint Stainless Steel
Turnstiles Secure Turn Style Gate
Model: RNCF21238Y Single Lane Full Height Turnstile
Functions & Features
1. Compatible with several control devices IC, ID, magcard, bar
2. Unlocking is quick and reliable.
3. Several working modes are optional, namely two-direction card
reading for limiting flow capacities, or, one passage works while
another is set to forbid passing, or, one passage normally operates
while another is free to pass.
4. Automatically reset function: It will automatically lock if the
pedestrian hasn't pass through the channel in the pre-set time
after the opening. The passing time is adjustable.
5. The centre rotor will be set free (default) or locked (optional)
automatically when the power is off.
6. Emergency-escape function: The centre rotor will be set free
automatically by pressing the emergency button which can be remote
controlled whether the power is on or off.
7. Counting Function of the controller, LED figure display function
8. Memory Function attached in the controller
9. With standard input, output interface.
|Housing material||304 stainless steel|
|Maximum Passage Width||600mm|
|Flap opening/closing time||0.2s|
|MCBF||5 million cycles|
|Transit speed||35 persons/min|
|Operating environment||Indoor/outdoor (Shelter)|
|Operating temperature||-30°C ~ 60°C|
|Operating humidity||≤95% no condensation|
The Full Height Turnstile can be widely used in some high security
places, typical areas of application are: prison, stadium, parking
system area , and so on.
STANDARD FEATURES & FUNCTIONS:
> The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader,consumption system, ESD
system and access control system etc, Rapid identification
technique, available to identify accurately and efficiently the
magnetic card, bar code card, ID/IC card etc.
> Operation model: Both directions can be set as controlled mode
or free mode, two or one direction can be controlled by switch-
button or access controller.
> Available with 3-arm, 120 degree spacing (default) or 4-arm,
90 degree spacing (optional).
> Anti backup function: to prevent reverse rotation once the
mechanism has move 60 degree from home.
> The running status of device can be set up through pressing
the built-in small keyboard of the main control board.
> When power off, the center rotor will be set free model
(default) or be locked model (optional).
> Emergency-escape function: the center rotor will be set free
automatically by pressing the emergency button which can be
remote-controlled whether the power is on or not.
> Reset automatically function: Go signal will be cancelled if
passage through is not completed within pre-set time. The standard
default is 10 seconds (time adjustable by changing parameter of
main control board).
> Remote control and management function: Through the management
computer to realize remote control and management.
OPTIONAL & CUSTOMIZED FUNCTIONS:
> Alternative Materials, Finishes and Custom Design
> Usage LED Counter function
> Audio and visual alarm in the event of an invalid entry or
exit and tailgating
> Access Control System Integration
> Camera System Integration
> Thermostat System Integration
The turnstile provides bi-directional access control. Each
direction may be in one of three states:
> Free passage: all person are authorized to pass under all
> Controlled access: each person must use a card reader before
being authorized to pass
> Lane closed: no persons are authorized to pass, and security
cards are ignored